The wireless kill cord system witch gives you security at sea.
Every year there is several serious boating accidents where the driver falls overboard and the kill cord has not been used.
If you fall overboard there is a great risk that the boat automatically turns and you get run over, or it continues straight ahead while maintaining speed.
The SafetyMOB system consists of a helm unit attached to the life jacket or the driver and a boat unit that is mounted in the boat. The helm unit communicates constantly with the boat unit which is connected to the boat’s existing emergency stop, if you fall overboard the communication is interrupted and the engine stops.
After the system is triggered for man overboard, the engine can be restarted by switching off the SafetyMOB system and after that start the engine as usual.
If you have forgotten to bring the helm unit you can run the boat as usual, the system is not activated until a helm unit are in close proximity to the boat unit on startup.
The SafetyMOB system works on both outboard and inboard engines, gasoline and diesels with electronic stop.
If you lose your helm unit you can buy a new one and register it to the system.
Price SafetyMOB-DMG : £179.00 incl VAT.
Free delivery on all UK orders.
Ease of installation
Installing a SafetyMOB central unit is relatively easy and can be performed by ”DIY”.
The boat unit´s cabling for emergency stop is connected in parallel or in series with the existing emergency stop. The boat’s existing emergency stop will continue to function as nomal. It is possible to connect an indicator light showing the current state of the system. It is also possible to connect an external relay to for instance stop an electric motor (trolling motor).
The boat unit is preferably mounted close to the steering wheel so that the distance to the driver is minimized, this makes the system less sensitive to radio interference.
Technical specification
Boat unit | Helm unit |
Operating voltage: 10-16V DC | Battery: CR2032 3V Lithium |
Current consumption: 10mA | Operating time: exceeding 1 year |
External relay: 12V/1A | Range: 10-15 m |
Indicator light: 80mA/12V | Opeating temp: -20 to+50 deg C |
Protection: IP66 | Protection: IPX7 |
Dimension: 76x53x13 mm | Dimensions: 60x30x11 mm |
Weight: 200g | Weight: 25g |
Made in Sweden.